ANKOM 2000 Series - Manual (Page 13)

Operator’s Manual
Rev E 1/14/15
pg. 13
Fiber Analysis Support Items
The following support items are needed to perform the fiber analysis procedures:
Item Recommended Product
Electronic Balance with four-place readout ANKOM #TB Balance Hardware
ANKOM #TBS Balance Software
Filter Bags ANKOM #F57
Bag Holder (used for adding sample to an empty filter bag) ANKOM #101.2
Heat Sealer for sealing the filter bags ANKOM #1915 (120V), #1920 (220V)
Solvent Resistant Marker ANKOM #F08
Desiccant Pouch ANKOM #X45
Oven for drying (capable of maintaining 102°C ± 2°) ANKOM #RD (120V), #RDI (220V)
Sample -----------------
Spoon -----------------
Analysis Options using the ANKOM
2000
Fiber Analyzer
The ANKOM
2000
Fiber Analyzer can be configured to run ADF, NDF, and Crude Fiber analyses. The instrument
will run with default digestion and rinse time settings unless you select the Custom analysis option. This option
allows you to do ADF, NDF, or Crude Fiber analyses using custom digestion and rinse time settings.
For maintenance purposes, the ANKOM 2000 also provides the capability to flush the solution lines.
The following sections provide the information you will need to use and maintain the ANKOM 2000 Fiber Analyzer.