Aviom AV-P2 - Manual (Page 14)

6 Av-P2 O
utPut
M
Odule
u
ser
G
uide
6 Av-P2 O
utPut
M
Odule
u
ser
G
uide
Pro16 Series Systems
A complete Pro16® Series audio network system consists of at least one
Pro16 input module connected to at least one Pro16 output device such as
the AV‑P2 Output Module, AN‑16/o Output Module, or A‑16II Personal Mixer.
Many configurations are possible by using additional input modules and/or
Personal Mixers and output modules.
About A-Net
The Pro16® version of A‑Net® is a high‑speed data transmission protocol
capable of sending and receiving high‑quality digital audio using readily
available Cat‑5 cables. A‑Net is a proprietary technology developed by
Aviom.
A‑Net is based on the physical layer of Ethernet, a Local Area Network (or
LAN) technology. This provides A‑Net with a mature and robust base on
which to build. However, it is important to note that A‑Net devices are not
compatible with Ethernet devices.
As used in the Pro16 series products, the A‑Net signal carries sixteen
channels of digital data from the Pro16 input module (AN‑16/i, AN‑16/i‑M, or
compatible console card) to each A‑Net device connected to the system.
Some of the benefits of using A‑Net to transmit digital audio are:
Virtually no latency •
No ground loops •
Easy cabling using readily available components •
An unlimited number of A‑Net devices can be used in a •
system
Ease in spanning long distances between system
•
components
P N
ote
: While the Cat‑5e cables and connectors used on your Aviom
products look like typical computer Ethernet network connections,
do not connect computers, routers, or other home and business
networking equipment to your Aviom products.