Aviom AV-P2 - Manual (Page 33)

Specifications
Audio Outputs 2, impedance balanced line‑level
5.0 mm Euroblock connectors, female, panel‑
mount
2 male Euroblock connectors supplied in box
Screw terminals: Audio +; Audio ‑; Ground
Channel Selection 16‑position rotary switch
D/A Conversion 48kHz, 24‑bit
Output Levels Variable: +4dBu to ‑31dBu in 1.5dB increments
6‑position DIP switch, per channel
Indicators LEDs; red: Power, green: A‑Net Active,
yellow: Stereo Pair
Output Impedance 100 ohms
Signal to Noise
(unweighted)
93dB typical, A/D to D/A
Measured from AN‑16/i Input Module to AV‑P2
Freq� Response 4Hz–22kHz +0.2dB/‑3dB
THD +N ‑93dB at ‑10dBFS
Crosstalk ‑85dB at 1kHz
Bit Error Rate (BER) 10 ‑12
Digital
Connections
A‑Net In: 1; A‑Net Out: 1; RJ45 connectors
Pro16™ A-Net
®
Uses unshielded Cat‑5e UTP (or better) cable
Latency 0.880 msec (measured from analog input to
analog output)
Power Supply
Input Voltage
Output Voltage
Plug Size
External, DC, universal switching type
100–240 volts, 50/60Hz, 30VA
18–24 VDC, 0.5 amp
2 mm, locking, center pin hot
Dimensions 7.45” (189.2 mm) wide x 7” (177.8 mm) deep; 1U
high
Weight 3.4 lb. (1.54 kg)
All Aviom products are designed and manufactured in the USA.
25 Av-P2 O
utPut
M
Odule
u
ser
G
uide