Aviom AV-P2 - Manual (Page 22)

14 Av-P2 O
utPut
M
Odule
u
ser
G
uide
A-Net Channel Selector
The AV‑P2 can output single channel, dual mono, or stereo audio signals. The
rotary channel selector knob is used to select a mono or stereo signal from
the Pro16 A‑Net stream connected to the AV‑P2 via its A‑Net In port.
LEFT RIGHT
MUTE
CHANNEL
STEREO
PAIR
A-NET
ACTIVE
POWER
AV-P2
OUTPUT LEVELS
1 2
3
4
5
6
7
8 9
10
11
12
13
14
15 16
ON
The rotary Channel selector
The Channel Selector provides mono or stereo output signals based on the
settings of the Pro16 network’s input module’s Stereo Link switches.
P N
ote
: The left and right audio channels have separate output level
settings. When using mono A‑Net channels, this allows two
different output levels to be set if desired.
Stereo Pair LED
The Stereo Pair LED will light whenever the Channel Selector knob is
positioned on either channel that makes up a left/right stereo pair (as set by
the network’s input module).
For example, if A‑Net channels 3 and 4 are stereo linked in the network,
moving the AV‑P2 Channel Selector knob to either position 3 or 4 will
produce the same result: the Stereo Pair LED will light, A‑Net channel 3 is
assigned to the AV‑P2 left audio output, and A‑Net channel 4 is assigned to
the AV‑P2 right output.
LEFT RIGHT
MUTE
CHANNEL
STEREO
PAIR
A-NET
ACTIVE
POWER
AV-P2
OUTPUT LEVELS
1 2
3
4
5
6
7
8 9
10
11
12
13
14
15 16
ON
The Stereo Pair, A-Net Active, and Power LED indicators