Aviom AV-P2 - Manual (Page 24)

16 Av-P2 O
utPut
M
Odule
u
ser
G
uide
AV-P2 Rear Panel
The rear panel of the AV‑P2 Output Module contains the DC power
connector, the left/right audio output Euroblock connections, and the A‑Net
connections.
The outputs on the AV‑P2 use 5.0 mm Euroblock connectors, and can be
connected to balanced or unbalanced audio devices. Male Euroblock jacks
are provided.
LEFT
DC
POWER
RIGHT OUT IN
AUDIO OUTPUT
AV-P2
+ – + –
18-24 VDC
500mA
The AV-P2 rear panel
DC Power Connector
The AV‑P2 Output Module comes with an external DC switching‑type power
supply. This type of power supply can be used worldwide with a wide range
of AC wall current output voltages (100‑240VAC). When traveling, you do
not need to replace the power supply in countries where voltages are
different. You may, however, need plug adapters to allow the power supply
to be connected to wall outlets in some countries, since many countries use
different physical plug layouts for their power systems.
If a replacement power supply is required, always choose a power supply
with equivalent specifications: 18‑24 VDC, 500mA, center pin positive.
Audio Outputs
Audio outputs on the AV‑P2 are provided via locking Euroblock connectors.
Each channel’s output level can be set individually using the DIP switches on
the front panel.