BUCHI Scrubber K-415 - Manual (Page 32)

5 Putting into operation
32 K-415 Operation Manual, Version B
5 .7 Hose connections
NOTE
Use clips and cable ties where necessary to secure the hoses in place.
5 .7 .1 Hose connections of the DuoScrub
The DuoScrub consists of the neutralization and the adsorption vessel.
To establish the hose connections, proceed as follows:
• Connect the adsorption vessel c to the bypass valve d using the PTFE hose and secure it with
the GL 14 hose connectors at both ends.
• Connect the emission source via a Woulff bottle to the neutralization vessel b and secure all
connections with hose clamps.
3
2
1
4
5
a Neutralization stage
b Inlet for fumes from the emission source
c Adsorption vessel d Bypass valve
e Silencer
Fig. 5.11: Hose connections of the DuoScrub