Analysis tab, Cells/ml sample, Ells – ChemoMetec SCC-100 User Manual
Page 24: Ample, 4 analysis tab
4 Analysis tab
14
4 Analysis tab
Analysis is the default start-up tab of SomaticView. In this tab data and results
transferred from the NucleoCounter SCC-100 are automatically displayed. An example of
the Analysis tab is shown in figure 16.
Once SomaticView has been launched the Analysis tab is automatically displayed.
Usually there are no files in the active session upon start-up. Start the measurements or
use the Browse button to navigate to another session (see chapter 4.2 Folder
selection.).
Figure
Figure
Figure
Figure 16
16
16
16 The SomaticView Analysis tab.
When a result of a Milk sample analysis is received from the NucleoCounter SCC-100, the
Cells/ml Sample, Image data, DF and Sample ID are displayed. The result from each
analysis is saved on the computers hard disk in an individual data file.
4.1
Cells/ml Sample
The estimated number of Somatic cells/ml Sample is displayed to the right of the Image
data field. The result is presented in the same manner as in the display window of the
NucleoCounter SCC-100.