COP-USA CD59NV-IRWP - Manual (Page 15)

IR Speed Dome Operating Manual
14
calling upon code number 65‐99.
Serial
No.
Command Fast Call Up Note
1 Start Auto Scan Call 99
Default to start auto scan of
group No.1
2 Start Auto Cruise Call 98
Default to start auto cruise of
group No.1
3 Start Pattern Tour Call 97
Default to start pattern tour of
group No.1
4
Start Auto Scan of
Group No.
Call 80+ Call pp+ Call 99
pp means：Group No.1‐8
5
Start Auto Cruise of
Group No.
Call 80+ Call pp+ Call 98
6
Start Pattern Tour of
Group No.
Call 80+ Call pp+ Call 97 pp means：Group No.1‐4
7
Stop Auto Mode/End up
Setting
Call 96
8 Open OSD Menu Set 95（or Call 95）
9 Remote Reset Call 94
10 Recover Factory Default Call 82
•System Self‐Testing
The dome will do self‐testing after power up, and system status will show “Normal” if system Is
running normally. If error happens, testing result will be shown in “○” or “X”. “○” means normal and
“X” means error. Please check the according meaning as follows:
•OSD Menu Operations
Call Preset
95 to
enter the
Serial
No.
1 2 3 4 5 6
Meaning Dip Switch Temperature Sensor Storage Pan Tilt Camera