Ir speed dome operating manual, Preset – COP-USA CD59NV-IRWP User Manual
Page 40
IR Speed Dome Operating Manual
39
•PRESET
The dome supports 220 presets. Please check the
following steps to set up a preset.
1)
PRESET NO.:
Move the cursor here and press IRIS OPEN to
enter the setup of Preset Number. Move the joystick to select a
preset number (1‐64 and 100‐255) and press IRIS OPEN to
confirm.
2)
TITLE:
Move the cursor here and press IRIS OPEN to enter the
setup of Preset Title. Check the detailed above in DOME TITLE
settings.
3)
<SET>:
Move the cursor here and press IRIS OPEN to enter.
Move the dome to a defined position as preset point and press
IRIS OPEN to save the preset position.
4)
CALL:
Move the cursor here and press IRIS OPEN to call up the
current preset.
5)
DELETE:
Move the cursor here and press IRIS OPEN to delete
the current preset.
6)
SPEED:
Move the cursor here and press IRIS OPEN to set up the
preset call up speed of LOW, MID and HIGH.
MAIN MENU
LANGUAGE :ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
<CAMERA>
<MOTION>
RESTART
FACTORY DEFUALTS
HELP
EXIT
MOTION
<PRESET>
<SCAN>
<SEQUENCE>
<PATTERN>
<ZONES>
<TIMING ACTION>
<MOTION DETECT>
<AUTO TRACKING>
BACK EXIT
PRESET
PRESET NO. :<001>
TITLE :PRESET :- - - - - -
CALL
<SET>
DELETE
SPEED :HIGH
BACK EXIT