COP-USA CD55HD - Manual (Page 11)

Operation Manual for Intelligent Speed Dome Camera
10
2.7.1.2 HOME ACTION: to set the auto home point. For example: if
the user want to set one scene to be the HOME, just set the
dome camera to this scene, and set it to be the preset No:3, then
open this menu, set the HOME ACTION to be “3”. And don’t
forget to set the AUTO HOME to be ON. The HOME ACTION
could be the preset “1-50”, RESUME, PATROL 1, SCAN 1,
PATT 1. The “1-50” are the preset number, RESUME is mean
to back to the scene before the manual control, PATROL 1 is
the patrol No.1, SCAN 1 is the scanning No.1 and the PATT 1 is the pattern No.1.
2.7.1.3 PARK TIME: to set the park time of the dome camera, it is mean how long the
dome camera will be back to the HOME. The time from 1-99 minutes.
2.7.1.4 PWR RESUME: to ON/OFF the function, which the dome camera will be back to
the scene before the power off.
2.7.1.5 RETURN: to return to the ADVANCE SETUP Menu.
2.7.2 PASSWORD: to enter the password setting menu. (Initial
password is 111111.)
2.7.2.1 PASSWORD: to ON/OFF the password protection.
2.7.2.2 MODIFY KEY: to enter the new password.
2.7.2.3 CONFIRM KEY: to enter the new password again for
confirm.
2.7.2.4 RETURN: to return to the ADVANCE SETUP menu.
2.7.3 CAM ID SETUP: to enter the soft ID setting submenu.
2.7.3.1 CAMERA S/N: to display the series number of the dome.
2.7.3.2 INPUT S/N: to input the series number of the dome.
2.7.3.3 OLD ID: to display the old address of the dome.
2.7.3.4 NEW ID: to display the new address of the dome. Input the
series number before inputting the new address.
2.7.3.5 SAVE & RETURN: to save and return to the ADVANCE
SETUP menu.
2.7.3.6 CANCEL & RETURN: to cancel and return to the ADVANCE