COP-USA CD55HD - Manual (Page 5)

Operation Manual for Intelligent Speed Dome Camera
4
2.1.2 DISPLAY SETUP: to enter the submenu of display of the screen by which ID display,
title display of preset point and display of camera screen can be set.
2.1.3 CAMERA SETUP: to enter the submenu of setup of normal data of
camera.
2.1.4 MOTTON SETUP: to enter the setup of enhanced function of
dome camera.
2.1.5 PRIVACY MASK: to enter the submenu of the camera privacy function setting.
2.1.6 ADVANCE SETUP.
2.1.7 SYSTEM RESET: to reset the system. The dome will make self-checking function
after it carries out reset function,the station for the dome's reset is AUTO FLIP
-ON/PTZ SPD RATE-ON/ ID DISPLAY-ON/ANGLE DISPLAY-OFF/ DOME
LABEL DISPLAY-OFF/ D-ZOOM-OFF/ PT INTERLOCK –AF AUTO/BLC-OFF/
AUTO HOME –OFF/ PARK TIME -4MIN/FAN-AUTO/ TIMP DISPAY-OFF
2.1.8 EXIT: to quit the main menu.
2.2 SYSTEM SETUP
2.2.1 SYSTEM INFORMATION: to display the system information.
2.2.2 AUTO FLIP: to ON/OFF the dome 180auto flip.
2.2.3 PROP PAN SPD: to ON/OFF the p roportional pan function.
2.2.4 RESERVEDThis function seting also kept for thsi products.
2.2.5 ALARM SETUP:
2.2.5.1 ALARM NO: to select the alarm channel.
2.2.5.2 ACTION: to select the action after alarm. The ACTION could
be the preset “1-50”, PATROL 1, SCAN 1, PATT 1. The
“1-50” are the preset number, PATROL 1 is the patrol No.1,
SCAN 1 is the scanning No.1and the PATT 1 is the pattern No.1.
After 3 seconds of the alarm function be cancelled ,it will
return to the original alarm station.
2.2.5.3 ALARM: to ON/OFF the alarm for each channel.
MAINMENU
1.<SYSTEM SETUP>
2.<DISPLAY SETUP>
3.<CAMERA SETUP>
4.<MOTION SETUP>
5.<PRIVACY MSK>
6.<ADVANCE SETUP>
7.SYSTEM RESET
8.EXIT
SYSTEM SETUP
1.SYSTEM INFORMATION
2.AUTO FLIP: ON
3.PROP PAN SPD: ON
4.RESERVED:
N/A
5.<ALARM SETUP>
6.RETURN
SYSTEM SETUP
1.SYSTEM INFORMATION
2.AUTO FLIP: ON
3.PROP PAN SPD: ON
4.RESERVED:
N/A
5.<ALARM SETUP>
6.RETURN