COP-USA DVR2716XD-M - Manual (Page 25)

DVR User Manual
20
4.1.2 Date & Time
Step1: Enter into MenuSetupBasicDate & Time tab. Refer to Fig 4-4:
Step2: Set the date format, time format, time zone in this interface; checkmark
“sync time with NTP server” to refresh NTP server date; user can also adjust system date
manually.
Step3: Click “Apply” button to save the setting; click “Exit” button to exit the current
interface.
Fig 4-4 Basic Configuration-Date &Time
4.1.3 DST
Step1: Enter into MenuSetupBasicDST tab. Refer to Fig 4-5:
Step2: In this interface, enable daylight saving time, time offset, mode, start & end
month/week/date, etc.
Step3: Click “Default” button to restore default setting; click “Apply” button to save the
setting; click “Exit” button to exit the current interface.
Fig 4-5 Basic Configuration-DST