COP-USA DVR2716XD-M User Manual
Page 56
DVR User Manual
51
Step 1: Enter into the DVR‟s Main MenuSetupNetwork interface to input IP address, Subnet Mask, etc. If using DHCP, please enable
DHCP in both the DVR and router.
Step 2: Forward IP address and port number in Virtual Server setup of the router or virtual server (If the user has enabled the UPnP function
in both the DVR and router, he can skip this step). Configure the firewall to allow accessing the DVR.
Note: Port forwarding settings may be different in different routers and server. Please refer to the router‟s manual for details.
Step 3: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP address
or domain name.
Step 4: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password
correctly, and enter to view.
Note: If you cannot download and install ActiveX, please refer to FAQ Q8.
Fig 6-1 View with IE Browser