COP-USA DVR2716XD-M - Manual (Page 55)

DVR User Manual
50
Step 3: Enter MenuUpgrade tab. Then the upgrade software name would be displayed in the upgrade list box.
Step 4: Select that software and then click upgrade button. It will upgrade automatically.
Note: Please wait for a while when the system reboots. Never cut off power during upgrading. The original configuration will be reserved
after upgrade.
6.5 Logoff
Enter into Menu  Logoff tab. A log off dialogue box will popup. The device will log off by clicking “OK” button. If you want to log in
again, click icon to enter into user name and password to re-login.
Remote Surveillance
6.6 IE Remote Surveillance
In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly.
Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform.
6.6.1 On LAN
Step 1: Enter into the DVR‟s Main MenuSetupNetwork tab to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP
in both the DVR and the router.
Step 2: Enter Record Setup to set network video parameters like resolution, frame rate etc.
Step 3: Open IE on a computer on the same network. Input the IP address of the DVR in IE address bar and press enter.
Step 4: IE will download ActiveX component automatically. Enter the username and password in the subsequent window
Notice: If HTTP port is not 80, other number instead, need add the port number after IP address. For example, set HTTP port as 82,
need input IP address like 192.168.0.25:82.
User name and password here are the same with that used on the DVR. The default is admin and 123456.
6.6.2 On WAN
There are two ways for the DVR to connect to internet.
1. Connect the DVR to internet through router or virtual server