COP-USA DVR2716XD-M - Manual (Page 40)

DVR User Manual
35
as follows:
Step 1: Select Other Settings tab. Enable DDNS server.
Step2: Select DDNS server.
Step 3: Input user name, password and host domain name registered in the DNS website
(See the following example).
Step 4: Click TEST to test the effectiveness of the relevant information.
Step 5: Click “Apply” button to save the settings.
Note: The domain name server that selected by user is a banding domain name of DVR.
User should logon the website which provided by the server supplier to register a user
name and password firstly, and then apply for a domain name on line.
Once applied, user can access the server from the IE client by using that domain name.
Fig 4-31 Other Settings
Enable UPnP: Select UPnP here and then enable UPnP function in your router. Therefore, there is no need for you to forward LAN IP
address and port in the router in connection of internet. After that, you can check the WAN IP address in the router.
 How to apply for a domain name?
Here we take www.dyndns.com for example.
Step 1: Input www.dyndns.com in the IE address bar. Click ”Free Trial of DynDNS Pro””Start the trial” to register.
Step 2: Input hostname, select service type and input your IP address. The picture is shown as follows: