2 hardware installation, 1 install hard drive &dvd writer, 1 install hard drive – COP-USA DVRHRT-16MD User Manual

Page 10: Step1: unscrew and open the top cover, Step3: screw the hdd, Hardware installation

Advertising
background image

Digital Video Recorder User Manual

2

Hardware Installation

Notice: Check the unit and the accessories after getting the DVR.

Please disconnect the power before being connected to other devices. Don't hot plug in/out

2.1 Install Hard Drive &DVD Writer

2.1.1 Install Hard Drive

Notice: 1. This series support four SATA hard drives or support three SATA hard drives plus one DVD writer. Please use

the hard drive the manufacturers recommend specially for security and safe field.

2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate
Recording Capacity”.
Step1: Unscrew and Open the top cover
Step2: Connect the power and data cables. Place the HDD onto the bottom case as below.

Fig 2.1 Connect HDD

Step3: Screw the HDD
Note: For the convenience to install, please connect the power and data cables firstly, and then screw to fix.

10

Advertising
This manual is related to the following products: