COP-USA DVRHRT-16MD - Manual (Page 41)

Digital Video Recorder User Manual
random positions, refer to below Figures:
Before drag after drag
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
4.3.5 Recycle record
Step1: enter into system configurationÆrecord configurationÆrecycle record;
Step2: tick off recycle record, the recycle record function will enable, it will cover the earlier recorded files and keep
recoding when HDD is full; if disenable this function, it will stop recording when HDD is full.
Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
4.4 Schedule configuration
Schedule configuration includes three sub menus: schedule, motion and alarm.
41