4 stamp, Fig 4-14 record configuration-stamp – COP-USA DVRHRT-16MD User Manual
Page 40
Digital Video Recorder User Manual
Pre-alarm record time:
the record time before event happen i.e. record time before motion detection or sensor alarm is
triggered.
Post-alarm record:
set the post recording time after the alarm is finished, five options: 10s、15s、20s、30s and 60s.
Expire time:
the hold time of saved records. If the set date is overdue, the record files will be deleted automatically.
Step2: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
4.3.4 Stamp
Stamp：
User can overlap the channel name and time stamp on video.
Step1: enter into system configurationÆ record configurationÆ stamp; refer to Fig 4-14:
Fig 4-14 record configuration-stamp
Step2: tick off camera name, time stamp; click Set button, user can use cursor to drag the camera name and time stamp in
40