COP-USA DVRHRT-16MD - Manual (Page 50)

Digital Video Recorder User Manual
Note: when user drag mouse to set motion detection area, they have to click icon to clear all set detection
area firstly, and then make the operation.
Step6: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step7: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
② Schedule
Step1: enter into system configurationÆalarm configurationÆschedule; refer to Fig 4-25:
Fig3-25 alarm configuration-schedule
Step2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.
50