COP-USA DVRHRT-16MD - Manual (Page 45)

Digital Video Recorder User Manual
45
nsor
① Basic
Step1: enter into system configurationÆalarm configurationÆsensorÆbasic; refer to Fig 4-19:
4.5.1 Se
Sensor includes three sub menus: basic, alarm handling and schedule.
Fig 4-19 alarm configuration-sensor-basic
Step2: enable sensor alarm, set the alarm type according to triggered alarm type. Two option: NO and NC.
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
tep4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
② Alarm handling
Step1: enter into system configurationÆalarm configurationÆsensorÆalarm handling; refer to Fig 4-20:
S
interface.