ClearOne comm ClearOne RAV 900 - Manual (Page 23)

RAV-Ware — Configuring Auxiliary Devices RAV-Ware — Configuring Auxiliary Devices 41
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
40
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Adjusting Record/Playback settings
If your device is not listed in the Device Toolbox you can manually customize and configure
the audio of your auxiliary devices. The Record settings window is used to customize and
configure audio being sent to recording devices that are connected to the record jack on the
RAV mixer. The Playback settings window is used to customize and configure the audio from
the playback device that is connected to the Playback jack on the RAV mixer.
To open Playback settings
• Open the Playback configuration window by clicking
on the
Playback device icon.
To adjust equalization
• Adjust the Low, Mid and High frequency tones using
the Equalization sliders.
To enable Stereo Mix
• Select Stereo Mix if your playback device uses stereo
inputs.
Note: While the RAV provides mono-only audio, it will
accept left and right audio from a stereo device.
However, you must select Stereo Mix to ensure proper
level adjustments are made.
To adjust audio level (volume)
• Using the slider, adjust the volume. The meter will
display input levels.
Note: To save the name and setting of your playback
device, refer to the Device Toolbox Editor on page 49.
To open Record settings
• Open the Record configuration window by clicking on
the Record device icon.
To adjust equalization
• Adjust the Low, Mid and High frequency tones using
the Equalization sliders.
To adjust audio level (volume)
• Using the slider, adjust the volume. The meter will
display input levels.
Note: To save the name and setting of your recording
device, refer to the Device Toolbox Editor on page 49.
Figure 3.26. Playback
Figure 3.27. Record
Record and Playback devices include VCRs, DVD players and sound cards. However, the
Playback/Record jacks are line level inputs and outputs and are not restricted to these
devices. You can use devices that have preconfigured audio settings from the Device Toolbox
or you can manually set the audio settings for your VCRs or DVD players.
Preconfigured record/playback devices
The audio settings for many common record/playback devices have been preconfigured for
optimal performance with the RAV system. Preconfigured devices are listed in the Device
Toolbox and can be placed on the Record and Playback icons.
To select a preconfigured record/playback device
1. Click the Device Toolbox button to display preconfigured devices.
2. Expand the category that matches the device you added.
3. Click the device and drag it to the configuration screen. Drop
over the Record or Playback icon. The label and icon will
change based on the selected device.
Note: You are not limited to record and playback devices
with these connectors. The Record and Playback jacks are
line input and line output jacks and can be connected to
video codecs, CD players and amplifiers.
To remove a device
1. Right-click on the device you want to remove.
2. Select Clear Device .
Figure 3.25. Record/Playback device list
Record and Playback