Cub Cadet T65 Series User Manual
Page 66
Advertising
T65 Series Vertical Shaft Engines
60
5.
Inspect the oil drain-back port. Make sure it will
allow oil to drain back into the engine. See Figure
5.12.
6.
Reassemble the PCV.
7.
Tighten the cover bolts to a torque of 27 in-lbs. (3
Nm).
8.
Inspect the breather tubing for cracks, brittleness or
signs of leaking. Replace the breather tube if any
are found.
9.
Re-assemble the engine by following the above
steps in reverse order.
10.
Test run the engine before returning to service.
Figure 5.12
Drain-back port
Breather tube
Advertising