Elektron Analog Four - Manual (Page 24)

KITS AND SOUNDS
16
Access the PERFORMANCE mode by pressing the [PERFORMANCE] key.
The ten available performance macros are seen in the PERFORMANCE menu. Turn the DATA ENTRY knobs to
adjust the parameter macro settings. The graphics indicating the active kit will briefly change to reflect the mute
status of the tracks.
PERFORMANCE SETUP
The ten performance macros available in the PERFORMANCE mode are set up in the PERFORMANCE
SETUP menu. Access this menu by pressing [FUNCTION] + [PERFORMANCE].
• The collection of all ten performance macros can be copied, cleared and pasted while in this
menu.
PERFORMANCE CONFIGURE is where parameters are assigned to the performance mac-
ros. After selecting this option, the list of performance macros and the knobs they are
assigned to will show up. In this menu, individual performance macros can be copied, cleared
and pasted.
Use the [UP] and [DOWN] arrow keys to select the DATA ENTRY knob corresponding to the
performance macro that will be edited. Press [YES/SAVE] to confirm the selection. The menu
where track parameters are assigned to the selected performance macro will appear.
Up to five track parameters can be assigned to a performance macro. Parameters can be
selected from all six tracks. Select from which tracks parameters will be assigned by click-
pressing DATA ENTRY knobs A-E. Select the track parameters that will be assigned by turn-
ing DATA ENTRY knobs A-E. Confirm a selection by clicking the knob or by pressing [YES/
SAVE]. DATA ENTRY knobs F-J are used to set the depth of the five track parameters. The
depth is an offset of the original track parameter value.