Elektron Analog Four - Manual (Page 86)

A-4 Appendix A: SYNTH TRACK PARAMETERS
AMP
ATK (EnvA Attack) controls the attack time of the EnvA enve-
lope, which controls the amplitude of the track.
DEC (EnvA Decay) controls the decay time of the EnvA enve-
lope.
SUS (EnvA Sustain) controls the sustain level of the EnvA enve-
lope.
REL (EnvA Release) controls the release time of the EnvA enve-
lope.
SHP (EnvA Shape) controls the general shape of the EnvA
envelope. Several linear and exponential shapes are available. A
dot to the left of the visual representation of the envelope indi-
cates that the envelope will restart from level zero. In other cases
it will start from the level it had when being trigged.
CHO (Chorus Send) controls how much of the synth track signal
that will be sent to the Wideshift Chorus effect.
DEL (Delay Send) controls how much of the synth track signal
that will be sent to the Saturator Delay effect.
REV (Reverb Send) controls how much of the synth track signal
that will be sent to the Supervoid Reverb effect.
PAN (Pan) positions the Sound of the synth track in the stereo
field.
VOL (Volume) controls the volume of the Sound. This parameter
is separate from the overall LEV overall gain control.
AMPLITUDE
The AMP page contains settings for the amplitude envelope and the effects sends, as well as panning and
volume of the sound.