Analog four as a filter bank – Elektron Analog Four User Manual
Page 74
SETUP EXAMPLES
66
ANALOG FOUR AS A FILTER BANK
Thanks to the neighbor routing, all the filters of the Analog Four can be used for providing an immense mono fil-
terbank consisting of 8 filters plus 4 overdrive circuits. The setup can be either serial or parallel. It can of course
be set up for stereo filtering as well. In this scenario 4 filters are available for the left and right channels.
In this example, the two filters of each track will be used in parallel with the filters of the other tracks.
Bild
1.
Connect the outputs of for example a Machinedrum to the inputs of the Analog Four.
2.
For all four synth tracks, set the WAV parameter in the OSC1 page to IN R, and the WAV parameter of
OSC2 to IN L. This will sum the left and right channels.
3.
Set all other WAV parameters to OFF. Make sure all SUB parameters is set to OFF as well.