Elektron Analog Four - Manual (Page 92)

B-4 Appendix B: FX TRACK PARAMETERS
REVERB
PRE (Predelay) controls the predelay time of the Supervoid
Reverb.
DEC (Decay Time) sets the decay time of the reverberated sig-
nal, essentially setting the size of the room.
FRQ (Shelving Frequency) controls the frequency of a shelving
filter. Together with the GAI parameter it can be used to dampen
the reverberated signal above a chosen frequency, making the
reverberation sound darker.
GAI (Shelving Gain) affects the damping of the reverberated sig-
nal above the shelving frequency set by the FRQ parameter. At
max value the treble is included in the reverberations; lowering
the value gradually dampens it.
HPF (HP Filter) controls the highpass filtering of the input to the
reverb.
LPF (LP Filter) controls the lowpass filtering of the input to the
reverb.
VOL (Mix Volume) adjusts the volume of the Supervoid Reverb
signal.
SUPERVOID REVERB
The Supervoid Reverb is perfect for positioning sounds in the mix.It can simulate everything from vast locations to small
spaces.