Spare parts list, Tool list, Installing the hi 6300 series instrument – Hardy HI 6300 Series User Manual

Page 16: Spare parts list tool list

Advertising
background image

8 Chapter

3

Step 5. Be sure to complete the warranty registration on the Hardy Process Solutions web

site.

Spare Parts List

Tool List

To install the HI 6300 series the following tools will be required.

Drill with 5mm drill bit

Jewelers screw driver (if cable assemble needs to be modified)

4mm nut driver with a maximum outside dimension of 8mm

10-50 mm Unibit (for optional display installation)

Installing the HI 6300 Series Instrument

Before getting started, take the following precautions:

Wear an approved wrist-strap grounding device when handling the module.

Touch a grounded object or surface to rid yourself of any electrostatic discharged prior

to handling the module.

Handle the module from the bezel in front away from the connector. Do not touch the

connector pins.

Do not install the module right next to an AC or high voltage DC module.

Route all the low voltage cables away from high voltage cables.

Part Reference

Description

Quantity

HI 6110

HI 6300 Series Instrument Display (Optional)

1

0551-0653-01-0

HI 6300 Series Alt. Panel and Wall Mount Kit
(optional)

1

0578-0072-01

Paper Mounting Template

1

0524-0034-01-0

Mounting Gasket

1

2140-0092-0

J1, 3-pin Power Connector

1

2140-0139-09-0

J2, 9-pin Load Cell Connector

1

2140-0139-06-0

J3, 6-pin Serial Port Connector

1

2140-0139-03-0

J4, 3-pin 4-20mA Connector

1

WARNING - Electrostatic discharge may damage semiconductor components in
the module. DO NOT TOUCH THE CONNECTOR PINS.

WARNING AVERTISSEMENT – Les décharges électrostatiques peuvent

endommager les composants semi-conducteurs dans le module. NE TOUCHEZ
PAS les broches du connecteur.

Advertising