Hardy HI 6300 Series - Manual (Page 44)

36 Chapter 4
•
•
•
•
•
•
a. Gross Weight
b. Net Weight
c. Tare Weight
d. Unit Count
e. All – Gross, Net, Tare, and Count (if Count enabled) values
f. OFF, Printer disabled.
USB Memory Stick
Available on the HI 6310 only.
The HI 6310 provides an interface to an external USB memory stick that allows HI 6310
parameters to be saved, restored. or copied to another instrument.
The USB memory stick commands can be activated through the web interface or the
display panel.
To access the USB Menu, from the front keypad, select Configuration > Enter,
Communications > Enter, USB >Enter, UP or DOWN arrow to Save or Restore > Enter.
On the Web page: Configuration; communications; USB; save/restore.
Step 1. Insert the USB stick into the HI6310
Step 2. Using the web interface or display panel, save or restore system parameters.
Analog 4-20mA
Available on the HI6310 only
The analog 4-20mA output is directly proportional to the programmed gross, net, or count
range; by setting the low value equal to 4mA and the high value equal to 20mA. These
values can be set from either the front panel or the web interface.