Hardy HI 6300 Series - Manual (Page 68)

60 Chapter 5
•
•
•
•
•
•
Value 20mA Parameter
Sets the high value that will produce a 20mA output.
On the Web page, select the communication menu and left click inside the Value 20mA
text field and enter the value.
On the HI 6310 series instrument display, select the communication menu and use the
UP or DOWN button to select the 4-20mA submenu, then select the Value 20mA menu
item. The current value will be displayed, press the ENTER or the RIGHT button if this
value needs to be modified.
mA Output Parameter
Sets a fixed mA output level when the weight source selected is manual. If any weight
source other than manual is selected, this is a read only value showing what the current
output level is in real time for the weight source selected.
On the Web page, select the communication menu and left click inside the mA Output text
field and enter the desired mA value.
On the HI6310 series instrument display, select the communication menu and use the UP
or DOWN button to select the 4-20mA submenu, then select the Value 20mA menu item.
The current value will be displayed, press the ENTER or the RIGHT button if this value
needs to be modified.
NOTE The analog output is not isolated. A 4-20mA isolator may be required for stable readings
depending on ground conditions.
Diagnostics Parameter Menu
Diagnostics is covered extensively in Troubleshooting (Chapter 9).
The available parameters on the Web page are:
• Parameters (which shows all parameters on the instrument)
• Integrated Technician (when connected to an IT Junction Box)
• C2
• Stability test 
WARNING - THE HI 6310 ANALOG 4 TO 20mA IS AN OUTPUT SOURCE.
DO NOT CONNECT THE 4 TO 20mA OUTPUT TO ANOTHER INTERNAL
OR EXTERNAL ANALOG SOURCE. TO DO SO MAY RESULT IN
PROPERTY DAMAGE AND/OR PERSONAL INJURY.
AVERTISSEMENT – Le HI 6310 analogiques 4 à 20 mA est une source de sortie.
Ne pas brancher la sortie 4 à 20 mA à l'autre Source analogique interne ou
externe. Pour ce faire peut entraîner des dommages matériels et / ou corporels.