Industrial Data Systems IDS 430 - Manual (Page 10)

IDS 430/433 Users Manual Version 1.0
- 10 -
The IDS 430/433 Display
The IDS 430/433 DISPLAY consists of a 6 character NUMERIC display and 6
statuses LED’s The NUMERIC display is normally used to display the weight on
the scale. The LED’s display the scale status. When lighted they indicate the
following conditions:
GROSS- The number displayed is the gross weight on the scale.
NET - The number displayed is the net weight on the scale.
MOTION- The weight on the scale is changing (not stable).
ZERO- The scale is at "Center of Zero".
lb- The weight displayed is in increments of pounds.
kg- The weight displayed is in increments of kilograms.
The IDS 430/433 Keyboard
The keyboard is used to initiate weighing functions and for data input and setup
of the IDS 430/433. It is divided into 3 sections: Numeric Keypad, Function
Keys, and Control keys as shown on the previous page.
Numeric Keypad
The numeric keypad is used for numeric data entry. Alphanumeric entry is
performed using a three-digit code for every alphanumeric character. Some
system parameters may require alphanumeric entry. Instructions for
alphanumeric entry are provided where needed.
Control Keys
The function keys ZERO, TARE, GROSS/NET, UNITS and PRINT are used to
perform the functions of zeroing the scale, tarring the scale, switching the weight
display between gross and net display, switching the weight display between LB
and KG display, and printing the weight. The function keys F1 and F2 are
programmable using Scale Basic functions.
Function Keys
The control keys ENTER, and CLEAR are used to control the data entry
operations for ID’s, setpoints and setup.