Industrial Data Systems IDS 430 - Manual (Page 24)

IDS 430/433 Users Manual Version 1.0
- 24 -
# 6 ID, Tare, and Total
This program uses the ID memory to store tare weights and totals.
Enter ID and Tare Data
Press the F1 key. The display prompts "id". Enter up to 8 digits for ID and then
press the ENTER key. The display prompts “tArE”. Enter the tare weight for that
ID.
Recall ID and Tare
Press the F2 key. The display prompts "id". Enter up to 8 digits for the weigh-out
ID and then press the ENTER key. The indicator recalls the ID from memory and
copies the ID tare to the tare register, depress the PRINT key.
The ID number, Gross, Tare, and Net are printed. The Net weight is added to the
ID’s totals register.
Print ID’s, Display ID’s, Clear Totals, Erase ID’s
Entering ID 0 accesses the ID maintenance functions. Press the F1 (or F2) key,
press the numeric 0 key, and then press the ENTER key. The display prompts
"rePort". Press the UNITS ( ↓ ) key or the PRINT ( ↑ ) key to scroll through the ID
file maintenance menu.
REPORT: Press the ENTER key when the display prompts "rePort". The display
then prompts "id". Enter an ID number to be printed or enter the numeric 0 to
print all ID's and depress the ENTER key.
DISPLAY ID’s: Press the ENTER key when the display prompts “diSPLA”. The
display then prompts “id”. Enter an ID number to display the data in its registers,
or enter 0 to scan ID memory and depress the ENTER key.
CLEAR TOTALS: Press the ENTER key when "CLEAr" is displayed. The
display prompts "id". Enter an ID number to clear or enter the numeric 0 to clear
all ID totals and depress the ENTER key.
ERASE ID'S: Press the ENTER key when the display prompts "ErASE". The
display then prompts "id". Enter an ID to be erased or enter the numeric 0 to
erase all ID's and depress the ENTER key.
REBUILD ID MEMORY: Press the ENTER key when the display prompts,
“rebuiLd”. The display then prompts “id”. Enter the numeric 0 then press ENTER
to rebuild ID memory.
COUNT UNUSED ID’S: Press the ENTER key when the display prompts
“Count”. The display prompts “FrExxx” where xxx is the number of unused ID
records in memory.