Industrial Data Systems IDS DT200 - Manual (Page 27)

25
4.5.5 TEST PARALLEL
Activate the SELF TEST menu and press the ENTER key when the DT210 displays
'TEST PARALLEL'.
The DT210 prompts: "ENTER TEST DATA".
Enter up to 16 characters of data via the DT210 keyboard. Press the ENTER key. The DT210
transmits the test data out it's parallel port.
Press the ENTER key to re-transmit the test data or press the CONTINUE key to enter new test
data.
4.5.6 UNUSED ID'S
Activate the SELF TEST menu and press the ENTER key when the DT210 displays
'UNUSED ID'S'.
The DT210 numeric displays: "USE NNN"
The DT210 alpha displays: "UNUSED ID'S NNN"
where the NNN's are the number of used and unused ids.
4.5.7 TEST MEMORY
Activate the SELF TEST menu and press the ENTER key when the DT210 displays
'TEST MEMORY'.
The DT210 displays: "TESTING MEMORY"
while the memory test is in progress.
The DT210 displays: "32K MEMORY OK" (1 memory chip installed)
"64K MEMORY OK" (2 memory chips installed)
"96K MEMORY OK" (3 memory chips installed)
If a memory error is detected the DT210 displays the number of good blocks (i.e. "72K
MEMORY OK").