Care and maintenance of your laser pririter 5-19 – Panasonic KX-P4440 User Manual
Page 113
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Removing paper from fuser area:
Press clamshell release button. Clamshell will open automatically.
2
Remove drum unit.
Remove developer unit.
Cautions
•Do not touch the fuser and main motor, since they are hot.
• Do not expose the drum unit to light for more than 5 minutes.
• Do not touch the yellowish-green drum surface. Lift the drum unit
by the green labeled tabs.
•Be sure not to touch the exposed developer.
•Be sure that no paper fragments remain in the printer.
4
Re-install developer unit. (Refer to Step 6 on page 2-5 for installation of
developer unit.)
Re-install drum unit. (Refer to Step 3 on page 2-8 for installation of drum
unit.)
5
Close clamshell.
To resume printing, press the ON LINE key.
Care and Maintenance of Your Laser Pririter 5-19