2 installation and initial setup – Panasonic KX-P4440 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.2 Installation Requirements
Environment
•Temperature Range: 50° to 90.5^ (10° to 32.5°C)
• Humidity Range: 20% to 80% RH
• Do not install the printer under the following conditions:
— Extremely high or low temperature or
extremely high or low humidity
— Direct exposure to sunlight
— Areas of high dust concentration
— Areas of poor ventilation
—Areas with chemical fume concentration
— Areas with extreme vibration
— Directly in front of air conditioning vents
• Place the printer on a stable, level table.
Minimum Space
Minimum space requirements for setup are shown below.
Power Source
• Use a voltage level which does not vary more than ±10% from the
voltage level marked on the nameplate (located on the rear of the
printer).
•Do not use an extension cord.
•This printer should be connected to a grounded outlet.
•Do not use a line conditioner, transient suppressor, or surge protector.
2-2 Installation and Initial Setup