Panasonic KX-P4440 User Manual
Page 117
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
5.5 How to Clean the Tungsten Wire
If reduced print quality occurs, clean the tungsten wire of the drum unit
with a cotton swab.
Important;
The drum unit contains a photosensitive drum. Exposing it to light
may damage the drum.
•Do not expose the drum unit to room light or sun light.
1
To clean the tungsten wire follow these procedures:
Turn the power OFF.
2
Press clamshell release button. Clamshell will open automatically.
3
Carefully wipe the tungsten wire by sliding a cotton swab from end to end
4 to 5 times.
4
Close clamshell.
Care and Maintenance of Your Laser Printer 5-23
Advertising