Front panel—all it takes is a touch 3-39, C;iutinn – Panasonic KX-P4440 User Manual
Page 83
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation Display/Description
9
10
11
12
Press
The display will show the Level 4 message.
ENTER
Press /
Q/G
Display the buffer size selection you desire.
Press
Makes the selection operational.
ENTER
OFF LINE
or
If you selected RS232C,
SET RS232C
If you wish to set the parameter of RS-232C, start at Step 6 in “Setting
the Parameter of RS-232C” on page 3-36.
Press
ON LINE
ON LINE
C;iutinn
•When
SELECT
INTERFACE
has
been
changed,
all
downloaded
and
uploaded
fonts,
including
permanently-saved
fonts,
and
all
macros, including permanent macros, are erased. You will need to
re-download or re-upload fonts and macros you desire.
•In the AUTO SWITCH mode, you should not send any data from
both Centronics parallel and RS-232C serial interfaces at one time
to assure a normal printing.
Front Panel—All It Takes Is a Touch 3-39