Panasonic NV-SJ230A - Manual (Page 10)

Option Setting
Press the MENU button © to display
the Main menu on the TV screen.
Press the Cursor buttons ( A T ) ©
to select [OPTION] then press the
OK button ©.
Press the Cursor buttons
(AT)©
to select the desired field.
On Screen Display
DELETE NAVIDATA: To delete all the Jet Navigator
data stored in the VCR’s memory.
- Press the Cursor buttons {◄►) © to select [OK] then
press the OK button © to do the deletion.
CLOCKSET
TUNEA PRESET
CHAOO&DELETE
NO:
END: initially set at this position.
It is done to delete all the Jet Navigator data.
► OPTION OSD REC: To set to the conditions for the
OSD Recording function.
- Press the Cursor buttons © to select [ON] or
[OFF].
TAPE SELECT [AUTO)
NTSC INPUT SELECT fAUTOj
NTSC PB SELECT fonPALTVJ
JET NAVIGATOR [OFF]
DELETE NAVIDATA [NO]
OSD REC [OFF]
DIRECT REC [OFF]
OFF:
ON: Initially set at this position.
This setting enables OSD Recording.
(See page 13.)
...
___ ^
If you select [ON], [JET NAVIGATOR] is set to
[OFF] automatically.
TAPE SELECT: To select the corresponding video
cassette tape length to display the
approximate remaining tape
time.
- Press the Cursor buttons (◄►) ©to select the
corresponding video cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90,-120,-180 and -240 tapes.
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
- The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
used to record NTSC signals.
- Press the Cursor buttons ©to select [AUTO].
Allows NTSC [4.43] or [3.58] signals to be distinguished
automatically.
- If the tape has not recorded correctly,
select 4.43 or 3.58.
4.43; When recording NTSC 4.43 signals.
3.58:
When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
NTSC PB SELECT; To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
- Press the Cursor buttons (■^►■) © to select the desired
position according to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43:
For TVs that can receive NTSC 4.43
signals.
3.58: For TVs that can receive NTSC 3.58
signals.
JET NAVIGATOR: To set to the conditions for the Jet
Navigator Function.
- Press the Cursor buttons © to select [ON] or
[OFF].
OFF: Initially set at this position.
ON; DSI appears on the VCR display and Jet
Navigator function works.
If you select [ON], [OSD REC] is set to [OFF]
automatically.
DIRECT REC: To set to the conditions for Direct
TV Recording Function.
- Press the Cursor buttons (^^) © to select [ON] or
[OFF].
OFF; Initially set at this position.
ON; This setting enables Direct TV Recording.
AV Input becomes exclusive channel for Direct
TV Recording.
(See page 14.)
Press the MENU button © twice to exit the On Screen
Display.