Panasonic NV-SJ230A - Manual (Page 9)

Preparations
- Confirm that the TV is on and the VCR viewing channel is
selected.
- Turn on the VCR.
To Set the Colour TV System
1 Press the MENU button 0 to —---------- ---------
display the Main menu on the TV
screen.
Press the Cursor buttons {A T) ©
to select [SYSTEM] then press the
OK button
► AUTO
PAL
NTSC
B/W
SELECT-.QS
END :MENU
Press the Cursor buttons (A T) © to select [AUTO].
- The VCR automatically distinguishes between PAL or
NTSC signals. If the picture lacks colour during AV
external recording or playback, set to [PAL] or [NTSC].
- When you want to record or play back in black and
white, set to [BAA/].
Press the MENU button © twice to exit the On Screen
Display.
To Make Various indicators Appear On
Screen Display
At a press of the OSD button ©,
the following indications appear
on the TV screen.
- Press the OSD button m again to
make the On Screen Display
disappear.
? ^
P
^ CH1
1—
(T)
Programme position
Q) Tape running display
Stop, Eject
Rewind, Review,
Index Search \<^,
Jet Search
Jet Rewind
◄◄
Fast Forward, Cue,
Index Search ,
Jet Search ►►
Playback ►
Recording •
Recording pause 119
Repeat playback
Present time/Tape counter/Remaining tape time/ Index
Search/OTR Indication/Play-Off Timer
Information Display
Present time 17:24
Tape counter -2:35.47
Remaining tape time REMAIN 2:34
Index Search SOI
OTR indication OTR 60
Play-Off Timer OFF 60
JET Rewind J : REW
(4) Tape speed indicator (SP/LP/EP)
(|) Cassette-in indicator
(6) Colour system indicator
Any selected colour TV system except [AUTO] appears
on screen display. (See the To Set the Colour TV
System.)
® Picture mode indicator
At each press of the PICTURE MODE button the
selected picture mode is set and following picture mode
indicators appear.
Example:
STANDARD: For TV programme recorded
DYNAMIC: For Scenery, Sports
SOFT: For Rental soft tape
CARTOON: For Cartoon
Note:
~ The on screen display may be disturbed or disappear
during special playback.