Panasonic NV-SJ230A - Manual (Page 7)

Manual Tuning Procedure
1 Press the MENU button m to display the Main menu on
the TV screen.
2 Press the Cursor buttons (A V) © to select [TUNER
PRESET] then press OK button
3 Press the Cursor buttons (A V) @ to select [CH] then
select the channel number you want tuned by pressing
the Cursor buttons {<3^)0.
4 Confirm that [CLEAR] is set to [OFF],
5 Press the Cursor buttons {A T) 0 to select [SEARCH]
then press the Cursor buttons 0 to start the
Manual Tuning.
- If the desired TV station has not been tuned, press the
Cursor buttons 0 again.
- Press the MENU button m and repeat steps 3-5 for
each programme position you want to tune to a station.
6 Press the MENU button 0 three times to exit the On
Screen Display.
Fine Tuning Procedure
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press the Cursor buttons (A T) 0 to select [FINE] then
press the Cursor buttons 0 to obtain the best
tuning condition.
- Press the OK button 0 to return the tuning to its former
state.
5 Press the MENU button 0 to exit r
the On Screen Display.
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press the Cursor buttons (A T) 0 to select [CLEAR] then
press the Cursor buttons (◄►) 0 to select [ON].
- Repeat steps 3-4 for other unused programme
positions to skip during the selection of programme
positions.
- To cancel the blanking of a programme position select
that programme position then set [CLEAR] to [OFF],
5 Press the MENU button 0 twice to exit the On Screen
Display.
To Add and Delete the Channel
Example:
If you want to add a new channel between Channel 4 and
Channel 6,
1 Press the MENU button 0 to display the Main menu on
the TV screen.
Press the Cursor buttons ( A T ) 0
to select [CH ADD&DELETE] then
press the OK button 0.
Press the Cursor buttons (A T) 0
to select the desired programme
position (example CH3) then press
the Cursor button (^ )© to select
[ADD].
•‘CLOCK SET
TUNER PRESET
CH ADD&OBLETE
SYSTEM
OPTION
^ c D dcks ^
TUNER PRESET »‘CHAOD&DEJ.rrE
SYSTEM
OPTION
( ~ ]
CH3
CK ADD&DBLETE CH AODADELETE
ADD: a DELETE: B
^ CHS ELECT: OS END; MENU
Prograrrime
Position
Channel
1 2
2 4
3 6
4 8
5 10
6 12
7 -
8
-
Programme
Position
Channel
1 2
2 4
■ ■ 3 ■■■■■
4 6
5 8
6 10
7 12
8 -
- Adding a channel shifts the programme positions of
Channel 6 to Channel 12 up, as shown in the list above.
- The list of the programme positions do not appear on
the On Screen Display.
4 After adding, tune the added channel. (See steps 3-5 in
Manual Tuning.)
- Press the MENU button 0 twice and repeat steps 3-4
for each of the other programme positions.
5 Press the MENU button four times to exit the On
Screen Display.