Panasonic NV-SJ230A - Manual (Page 4)

VCR Operation
0 VCR POWER button
© PICTURE MODE button
© INDEX button
0 SEARCH button
0 Play button
© Rewind button
0 JET REW button
© PROGJCHECK button
© SPEED button
0 DATE button
0 Channel button
0 ON button
0 OFF button
© DIRECT REC button
0 TIMER(REC) button
0 Pause/Slow button
0 Stop button
0 Fast Forward button
0 NAVI button
0 REC button
0 VCR Channel button
0 Infra-red transmitter
0 DISPLAY button
0 RESET/CANCEL button
0 OSD button
0 INPUT SELECT button
0 MENU button
0 OK button
0 Cursor buttons
0 Child Lock Function buttons
(Convenient function to prevent unauthorized use)
This function deactivates all buttons on the VCR and the
remote control. Use this function, when you do not want
other people to operate the VCR.
To Activate the Chiid Lock Function;
1 Hold down the OK and the OFF (+) buttons 0
simultaneously until the [Xi hold] Indication appears in
the VCR display.
- if you press a button while the Child Lock function is on,
the [X hold] indication appears in the VCR display to
inform you that no operation is possible.
To Cancel the Child Lock Function;
1 Hold down the OK and the OFF (+) buttons 0
simultaneously until the [X hold] indication
disappears.
0 Cassette compartment
0 EJECT button
© TAPE REFRESH button
0 infra-red Remote Control Receiver window
0 VCR display
0 CVC indicator
The crystal view control function ensure that you always
obtain the optimum picture quality so that you get the best
picture automatically.
While the VCR is turned on, the CVC indication 0 is
always displayed to show that the Crystal View Control is
activated
0 REC/OTR button
0 VIDEO IN socket
0 VIDEO OUT socket
0 AUDIO IN socket
0 AUDIO OUT socket
0 RF IN socket
0 RF OUT socket
TV Operation
Only Panasonic TVs can be operated with the provided
remote control.
The settings for operating the TV with the remote control
have already been made.
No additional settings need to be performed.
However, some Panasonic TVs cannot be operated using this
remote control.
0 TV POWER button
To switch the TV on from standby mode (OFF) or vice
versa.
On some TVs it is only possible to switch the TV to
standby mode (OFF) with this button, but not on. In this
case, try to turn the TV on with one of the following
buttons;
AV .button 0
TV Channel button 0
0 AV button
To select desired AV input on the TV.
0 TV Channel button
To select the desired programme position (TV station) on
the TV.
0 VOLUME button
To adjust the volume of the TV.