Acura 2000 TL - Owner's Manual - Manual (Page 117)

Climate Control System
Recirculation Button
This button controls the source of
the air going into the system. When
the indicator above this button is lit,
air from the car's interior is sent
through the system again (Recircula-
tion mode). When the indicator is off,
air is brought in from outside the car
(Fresh Air mode).
You can, for example, manually put
the system in recirculation mode
when driving through an area of
smoke or fumes.
Fan Control Dial
You can manually select the fan
speed by turning the fan control dial.
When you turn the dial clockwise,
the fan is taken out of automatic
mode and starts to run at its lowest
speed. Turning the dial fully
clockwise increases the fan's speed,
which increases air flow.
MODE BUTTON FAN CONTROL DIAL
RECIRCULATION BUTTON
Mode Button
Use the MODE button to select the
vents the air flows from. Some air
will flow from the dashboard corner
vents in all modes. Each time you
press the MODE button, the display
shows the mode selected. Press the
button four times to see all the
modes.
Some air will come out of the side
vents in all modes.
Comfort and Convenience Features
Main Menu Table of Contents