Homelink universal transmitter – Acura 2000 TL - Owner's Manual User Manual

Page 87

Advertising
background image

HomeLink Universal Transmitter

The HomeLink Universa l

Transmitter built into your car ca n

be programmed to operate remotely-
controlled devices around your home ,
such as garage doors, lighting,

or

home security systems. It can
replace up to three remote
transmitters.

Customer Assistance

If you have problems with training
the HomeLink Universal

Transmitter, or would like

information on home products that
can be operated by the transmitter,
call (800) 355-3515. On the internet,
go to www.homelink.jci.com.

Important Safety Precautions

Always refer to the operating

instructions and safety information
that came with your garage door
opener or other equipment you
intend to operate with the HomeLink
Universal Transmitter. If you do not
have this information, you should
contact the manufacturer of the
equipment.

While training or using the
transmitter, make sure you have a

clear view of the garage door or gate,
and that no one will be injured by its
movement.

General Information

If you are training the transmitter to
operate a garage door or gate, it is
recommended that you unplug the
motor for that device during training.
Repeatedly pressing the remote
control button could burn out the
motor.

The HomeLink transmitter stores
the code in a permanent memory.
There should be no need to retrain
the transmitter if your car's battery
goes dead or is disconnected.

If your garage door opener was
manufactured before April 1982, you
may not be able to program the
HomeLink Universal Transmitter to
operate it. Garage door openers
manufactured before that date do
not have a safety feature that causes
them to stop and reverse if an
obstacle is detected during closing,
increasing the risk of injury. If you

have questions, call (800) 355-3515.

Instruments and Controls

Main Menu

Table of Contents

Advertising