Homelink universal transmitter – Acura 2000 TL - Owner's Manual User Manual

Page 90

Advertising
background image

HomeLink Universal Transmitter

It may be helpful to have someone
assist you with this procedure.

1. Make sure you have properly

completed the "Training the

Transmitter" procedure.

2. Find the "Training" button on your

garage door opener unit. The
location will vary, depending on

the manufacturer. The

manufacturer's documentation
may help.

TRAINING BUTTON

3. Press the Training button on the

garage door opener unit until the
light next to the button comes on,
then release it. The light may blink,

or come on and stay on. You then

have approximately 30 seconds to
complete the following steps.

4. Press and release the button on

the HomeLink transmitter. (The

same button you trained with the
"Training the Transmitter"
procedure.)

5. Press and release the HomeLink

transmitter button again. This

should turn off the training light
on the garage door opener unit.

(Some systems may require you to

press and release the button up to
three times.)

6. Press the transmitter button again.

It should operate the garage door.

Instruments and Controls

Main Menu

Table of Contents

Advertising