Agasio A502W - Manual (Page 20)

More Security More Convenience
Resolution: Set the resolution to be 160*120/ VGA(640*480)/ QVGA (320*240). (Figure 3.9)
NOTE: When doing recording, Rate and Resolution parameter settings is very helpful for getting small
size record files, the lower parameter to get the smaller file.
Figure 3.8 Figure 3.9
TOP Menu
:
Figure 4.0
: Click it to get live video. When you want to back to live video from other menus, just click it.
Only under live video, you can do the operation on the right side, such as play, stop, snapshot etc.
: Click it to get into play mode, when you click stop icon, the video will be stopped, then click
play icon, it will show the video again.
: Click it to stop the live video. You can click play icon if you want to see live again.
: Click it to get snapshot. It will show the date and time of the snapshot you get, when you want
to save it, you will find the snapshot file named by “snapshot_MAC ID_date_time”.
: Click it to start record by manual, and the icon will change to red color , click it
again, it will stop record. The record file will be saved to the folder you set. (Figure 10.8-Figure11.0)
: Click it to collect the sound around the camera, if you plug a earphone or a speaker in the
computer which you are using, you will hear the sound around the camera. This IP Camera has a built-in
microphone, when you click it to start work, the icon will change to red color , click it again, will stop
audio function.
: Click it to start the talk function, firstly you have to plug a microphone in your computer,
connect a speaker via audio output hole at the back of the camera (Figure 1.2), when you are talking about
something with the microphone from your computer, the sound will come out from the side of camera, people
beside the camera will hear the sound. Once click it to start work, the icon will change to red
color , click it again, will stop talk function.
NOTE: For visitor, if you click other menus which visitor don’t have the right to operate it, there will be a pop-up
of login interface (Figure 2.6), please input the user name / password for at least 3 times to login again.
20