Agasio A502W - Manual (Page 46)

More Security More Convenience
Alarm Input Armed / IO Linkage on Alarm
you want to connect external alarm devices, when it’s an alarm input device, choose Alarm Input Armed to
3.18.3
If
enable it, when it’s an output device, choose IO Linkage on Alarm to enable it.
Figure 10.0
here are two options for Trigger Level. (Figure 10.1)
alarm triggered.
ered .
T
High: When the external alarm device is close, then the
Low: When the external alarm device is switching off, then the alarm trigg
Figure 10.1
There are two options for Output Level. (Figure 1
closed.
off .
0.2)
High: Choose it, the IO Pins work as a switch which is
Low: Choose it, the IO Pins work as a switch which is switching
Figure 10.2
46