Agasio A502W - Manual (Page 9)

More Security More Convenience
2. SOFTWARE OPERATION
2.1 IP Camera Tool
When the Device has been mounted properly, you can double click the Icon “IP Camera Tool”
and a dialog box as Figure 1.9 will pop up.
Figure1.9
Note: The software searches IP Servers automatic AN.
und within LAN. After about 1 minute search, the Result Field will show “not found IP
. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the total number is
. The IP Cameras installed within LAN do not share the same subnet with the monitoring PC. A prompt as
to
OTE: If it shows” Subnet doesn’t match, double click to change!”, you can also choose ”Obtain IP from
2.1.1 Six Options
list and Click right mouse, there are six options: (Figure 2.0)
ally over L
There are 3 cases:
1. No IP Cameras fo
Server” and the program shut automatically.
2
displayed in the result field as shown in Figure 1.9
3
shown in result field (prompt: Subnet doesn’t match, double click to change!). Click the left mouse button
choose the prompt and click the right mouse, choose Network Configuration to set the static IP address of
the Camera to the same subnet as LAN. (Figure 2.3)
N
DHCP Server” to get a dynamic IP. (Figure 2.2)
Choose the IP Camera
Basic Properties, Network Configuration, Upgrade Firmware,
Refresh Camera List, Flush Arp Buffer, About IP Camera Tool.
9