ALTANA BYK-mac Manual - Manual (Page 16)

15
English
Power supply
Make sure that the
batteries are correctly oriented in the battery
box according to the (+) and (-) signs.
Insert the battery box into the battery compartment
and press it down so that the strap moves into the
cut-out of the housing.
Set the battery compartment cover in the slot
again. Lock the cover by sliding it downwards until it
snaps.
When the battery voltage falls below the required
minimum voltage, the following message appears on
the display:
Battery empty!
+
+
- - mode
std
esc
ode
std
esc