ALTANA BYK-mac Manual User Manual
Page 25
Advertising
24
English
Calibrate
When light trap calibration is completed, the
instrument must be placed on the white standard.
Position the instrument as thoroughly on the white
standard as it is described for the light trap and
press the operate button.
The reading process is indicated on the display.
When calibration is complete, an affirmation is
shown in the display. Confirm by pressing the
Operate button or the wheel to return to the main
menu.
If an error occurs during calibration, try to
read the plaque again. If the error message
still occurs, refer to section "Errors and warning
messages“.
Advertising