ALTANA BYK-mac Manual - Manual (Page 27)

26
English
8. Measure
Select the menu item Measure by pressing the
operate button/scroll wheel.
A selection menu appears.
”Continue last series”: To continue the last test
series. If no series is stored, it will be created.
”Sample”: To measure absolute data.
”Difference”: To measure differences. Select an
existing standard or create a new one.
”car_01”: To take readings according to a predefined
measurement sequence (organizer).
8.1 Continue last series
”Continue last series” leads you directly to the
measuring sequence of the last series. Press
operate to start the reading.
Measure