AltiGen IP 710 - Manual (Page 18)

10 IP 710 Manual
Conference
button
Initiates a conference and
adds in other parties one at
a time.
•
Single Call Waiting, Multiple
Call Waiting or Live Call
Waiting must be enabled for the
extension by the system
administrator or in AltiView/
AltiAgent in order to add
incoming calls to a conference.
• The user who initiates the
conference call can select another
conference member’s call and
drop it from the conference by
disconnecting the call. The
feature is unavailable to all other
conference members, even when
the conference initiator hangs up.
Workgroup
Status Displays the workgroup
status in the LCD.
• The system administrator
configures which key will display
the workgroup status.
Flash button
Signals PBX that special
instructions will follow.
Greeting
button
Lets user record greetings
and select a greeting to
play.
• Greetings are affiliated with
activity codes.
Headset button
When pressed, the user
will be able to activate the
RJ-9 or 2.5mm headset
port.
• This button is used as a hook
switch for headset ports.
• User should specify in Phone
Setting > Headset Type which
headset port is being used.
Hold button
Places an active call on
hold.
• When
Multiple Call Waiting is
enabled at the extension, the user
can put multiple incoming calls
on hold and retrieve using the
phone’s /buttons and
Enter
button.
• Pressing
Hold while onhook will
retrieve the last hold call.
• Supports up to 9 hold calls.
Feature Description Notes